Here’s a crazy proposition for you: take five house-bloggers who’ve never worked together, plop them in a city far away from any of their homes, and give them a kitchen to renovate top to bottom in three days. Sit back, relax, and see if they all survive?
That’s pretty much what our friends at Lowe’s asked me, Kim and Scott, and Julia and Chris to do. HOW EXCITING AND ALSO TERRIFYING?! Sure, why not!
I’ll tell you why not.
Because renovations are hard, and usually take a while, and cost a lot of money, and it’s difficult enough to make decisionsby yourself without adding four other opinions to the mix about every little thing that goes into creating a room—especially one with as many moving parts as a kitchen! Amplify that chorus of opinions and different approaches and methods when something unexpected comes up (newsflash—it always comes up) and you possibly have a recipe for five otherwise nice people who happily coexist on the internet to, I don’t know, murder each other. I might have said a resounding YASSSSSS to joining this Dream Team without fully appreciating the risks involved.
BUT! WE DID NOT KILL EACH OTHER! Quite the opposite, actually! All that stuff I said above, about the lack of time and slim budget and difficult decisions and unexpected surprises and multitude of opinions and methods? Actually made it a lot better. It was FUN, folks. Everybody brought many-somethings to the table, and it was truly a privilege to work alongside all these talented and kind and hardworking and awesome people. Here’s how it all went down!
Chris and Julia were our brave team leaders, and the ones who had the pleasure/pain of sifting through over 2,500 applications that were submitted. Insanity! They narrowed to a top ten, at which point me and Kim and Scott weighed in, and then Chris and Julia duked it out some more (in literally the kindest way possible, I’m sure, because they are aggressively nice always, but most especially to each other), and that landed us in this 1900 Baltimore rowhouse owned by Aura and Nate, renovating this kitchen! Can you smell the potential from there? That’s one pretty dreamy project, I’d say!
Then Julia and Chris spent a few weeks going between the homeowners, each other, and our pals at Lowe’s to figure out a reasonable scope of work and, of course, a whole design plan! Obviously we had to be able to do it in 3 days, which was the first major requirement, but we also had to get it done for under 5K (including all new appliances!!) and create a kitchen that would complement the age of the home while balancing the homeowners’ more modern sensibilities. Easy, right? HA. HA. HA.
So Chris and Julia sent Kim and Scott and me the design plan, and one of the first notes was something to the effect of “we’re not really sure what to do about the columns.”
WHAT TO DO ABOUT THE COLUMNS?! SAY WHAT?! Then it emerged that the homeowners disliked the columns and were convinced that they couldn’t be original to the house, like maybe they were a hokey post-modern 1980s addition or something? Which I can totally understand because people did do some horrible stuff sort of meant to look like this in the 80s, but NO! This is not that! They’re wood, they have a thousand layers of paint on them…they’re the best part of the whole space! I thought that’s why we picked it! Corinthian goodness! I will tie myself to those columns and take a sledgehammer to the gut before watching them get demolished! That or they will come back to New York with me and live in my basement until I figure out what to do with them! So immediately, Daniel Kanter is causing drama over old house stuff. I’m zero fun to work with; ask anyone.
But in classic Chris and Julia fashion, they were generous about hearing me out, quickly course-corrected, and I think implored the homeowners to trust us and let us work with the columns instead of against them. Thankfully they agreed and we could all proceed in a non-violent fashion.
By the time we arrived Thursday evening, here’s where we were! Nate and Aura had been busy bees, ripping out the dingy tile floors and upper cabinets and formica backsplash. We knew, I think, that we were going to demo the old soffit, but…IMMEDIATE CURVEBALL, THAT CEILING IS FAKE! Nobody knew this. Haha!
It’s hard to appreciate in photos but was pretty dramatic in real life—that’s the actual ceiling height above the soffits…almost a foot and a half higher than the existing one! So we were working with, in order from top to bottom: ceiling joists at about 9.5 feet, lath, plaster, furring strips, acoustic tiles, and then a whole second ceiling shoddily framed at about 8 feet and sheetrocked. Those “beams” are completely decorative—just 1×6 pine boards stained brown and glued and nailed to the drywall. Of course the modern framing did not run beyond the soffits or over the pantry closet we removed, so Chris and Julia and I had an emergency team meeting (“Hi Chris, nice to meet you!”) before Kim and Scott’s plane even landed to discuss what to do!
The options were:
- Keep the existing ceiling, patch in where necessary, and somehow figure out how to remove the “beams” or extend them so it would all look continuous. This plan was problematic for several reasons (is it actually any easier or faster than just taking it out altogether? Because the “beams” were glued up, they’d take a lot of drywall with them on their way down. Also, lame! Who doesn’t want higher ceilings! Go big or go home!), so my solution was to get bossy and loud until that option was off the table. I DID IT FOR THE COMMON GOOD, OK?!
- Total demo, new sheetrock. OY VEY. Nobody wants to demo plaster, ever, and that’s a HUGE extra amount of mess and waste to squeeze into in an already extremely packed order of work. Then I innocently asked if anybody was particularly good at drywall work, because hanging is the easy part but mudding and taping typically takes three days alone and is very difficult to do well, especially on a ceiling! Nobody seemed all that confident so it seemed like maybe testing our underdeveloped drywall skills on a stranger’s ceiling that had to be done in a matter of hours was not the best place to take a gamble.
- Something else! So I suggested leaving the plaster and lath intact and furring strips in place, and affixing our new ceiling material to that. But what material? Beadboard, duhz! But actual tongue-and-groove beadboard would have also been a big time-suck and pretty expensive for the square footage we needed, so I suggested those inexpensive 4×8 MDF panels that look like beadboard, with some nice simple molding treatment to cover the seams. Easy and fast, I told everyone! I promise!*
*never listen to me if I claim anything will be easy and fast. it never is.
But after looking at a couple inspiration images, Chris and Julia were on board and so we walked into Day 1 with a reasonably solid plan and tried to project confidence about it to two increasingly wary homeowners who were probably beginning to regret signing onto this madness while watching us immediately dive in to just wrecking their house. It felt exactly like that scene from The Money Pit. You know the one.
Let. The. Games. Begin.
Can I just say that watching Kim and Scott work together in real life just warmed every cockle of my cold jaded heart? Scott has the enthusiasm of a camp counselor and Kim has the patience of a saint and they’re both so good at just doing it right. It’s a jealousy-inducing pleasure to witness. Jerks.
Here’s a classic when-one-thing-leads-to-another moment—we did not plan on demoing this whole wall, but it was sheetrock over 2×3 furring strips over plaster over lath, but the drywall and furring strips didn’t run all the way up to our new ceiling height! Added to that, we needed to get them some outlets and a sconce on this wall, and the wall to the right of the window was inexplicably bumped out a few inches, so once again I was like “HEY GUYS LET’S JUST RIP IT ALL OUT!” and for some reason they listened to me. Suckerrsssss.
Check it out though—you can see where there was once a window! We momentarily considered using the void, at Aura’s brilliant suggestion, to do little recessed shelves for spices and stuff, but then again we already had a more functional shelving plan and it probably was not the best plan to leave that big space uninsulated for the sake of cuteness. I love that idea though—slightly different circumstances and it would have been SO GOOD.
UGH, KIMMY MY LOVE! Obsessed with this one. POSSIBLY my favorite part of this whole experience was when Kim shocked and delighted me with a stiff slap on the ass while I was bending down to do something, and then we spent three days waiting for various opportunities to get back at each other. CAN YOU BLAME ME.
I’ll stop objectifying Kim now.
ALSO JULIA. SIT DOWN, LADY! She was the only one among us simultaneously growing another human being inside her body, and she’s still an beast! She was appropriately cautious and safe and all that, but good lord if anyone had an excuse to sit out of some physical work, it was her! Serious. Badass. If that baby isn’t tiling walls with the best of them by the time she’s in preschool, I will be shocked.
Just to give you a small sense of the pace of all this, it was insaneeeeee. My house would be done in a week if I had all these amazing people around! OFFER STANDS, YOU GUYS.
Literally before the dust from demo had settled, Chris and Scott and Chris’s brother Brandon were following behind with sheetrock! Scott ran mesh tape and Chris and Brandon tag-teamed the first coat of mud. Seriously, blink and everything changes.
While the joint compound dried, Chris and Brandon started cutting our faux-beadboard panels to size (we didn’t use full sheets so that we could arrange things in a more visually pleasing grid) and Scott and I worked together hanging them up! We ran construction adhesive across the furring strips and attached the panels with 16 gauge finish nails from a pneumatic nail gun. Pow, pow! It was a little tricky to get the hang of because the nail depth had to be set jusssstttt right to hold the panels instead of going right through them. The homeowners followed behind with a nail-set to sink any stubborn nails, and then covered each hole with a little dab of spackling compound to be sanded smooth later.
At this point the ceiling looked like total garbage and even I was privately a little nervous about it. Without anything covering the seams and a bunch of nail holes, it just looked really flimsy and not attractive at all. DON’T WORRY!
I’ve said it before and I’ll say it again…I do not enjoy skim-coating. But you guys, practice pays off!! Since we hung sheetrock over a 120 year old brick wall with 120 year old furring strips and 120 year old lath, things were not exactly even—easily a recipe for seeing every seam and having a drywall job that would look terrrrrible. I mean, we could blow it out enough in photos to look nice for you guys, but that ain’t our game! So I took on the second and third finish coats of joint compound, and guys…crushed it. I wouldn’t normally gloat like this (maybe I would? maybe self-awareness is not my strong suit?) but I was using fast-setting 45-minute joint compound, so you have to work fast, and I couldn’t sand much because people were painting and tiling and stuff so I had to burnish the walls with a spray bottle and a trowel, plaster-style…anyway, I’m proud of that there drywall work! After paint it looked totally pro.
Also, window trim! I pushed to match the moldings to the ones around the columns, which were just simple 1-by lumber with rosettes in the corners, and Lowe’s carries a near-perfect match! I made a quick windowsill out of a standard pine stair tread, chamfered the apron on the table saw because we didn’t have a router…ya know, special little details. Fun times!
While cabinets were going up and getting painted, Scott and I worked away on finishing up the ceiling install! Originally we thought we’d maybe use little lattice strips to cover the seams and a more traditional crown molding around the room, but I LOVE what we landed on! We used 1×4 (pre-primed boards to save time) to cover the seams, and as a super minimal crown treatment around the whole room! I love how substantial it looks without feeling overdone.
The home stretch was an absolute flurry of activity. Everyone trying to get their projects checked off the list while also staying out of each other’s way…madness! When exactly nobody volunteered to do the crown molding around the tops of the cabinets (we’re wimpy about some stuff, I guess!), Chris jumped in and banged it out in like half an hour! Awesome. Kim, Aura, Nate, and Julia took on tiling the backsplash, which is just simple and budget friendly 3×6 white subway tile—just 22 cents a tile! Can’t beat that, and of course it’s a clean, classic choice that allows other features like the exposed brick wall to really shine instead of competing.
Scott had to get back to Chicago on Sunday afternoon (I do NOT envy that he then had to wake up Monday morning and go to his super serious grown-up job…this was EXHAUSTING!), Julia and Kim and I worked until about 2 in the morning before turning in, and Chris and Brandon stayed all night laying the flooring! Then on Monday morning there was a mad dash to the finish, adding extra coats of poly to the countertops and installing baseboards and shoe molding, and caulking and touch-up painting everything in sight. But we got her done. And she looks goooood!
From this…
To this!
THREE DAYS, PEOPLE! There wasn’t nearly the time to throw a full column restoration into the mix, but we did give them a fresh coat of paint in satin finish to match the rest of the moldings. Just knocking down the super high gloss paint that was there before made a huge difference in making them look like the beautiful and grand antiques that they are instead of a kind of misplaced vestige from another time. You go, columns!
AND GUESS WHAT? Aura said, without prompting or persuasion, that the columns fit in now! They work! And that, to me, was the best. Learning to love what makes their house unique and special is kind of the best possible outcome, right?
Let’s take a walk around!
Even though the window molding butts right up to the fridge surround, it just feels so…right, I think! The windowsill almost got nixed in favor of a more simple casing, but I really think it’s that kind of detail that makes it feel authentic to the age of the house. It’s really not a lot of extra work to just do it up right!
Also, check out those shelves! Such a good idea, Miss Julia! I guess the brackets are meant to be table legs, but Chris drilled pilot holes through the backs so they could be mounted to the walls and used as shelving brackets. Fun!
The ceiling! The ceiling! I really really do love the way it came out. I wouldn’t typically use those MDF panels because I like to make things as painful as possible and use the real deal (also available at Lowe’s, of course!), but they really look great after the requisite patching and caulking and painting. Everyone was pretty into it, and—joking aside—it really was very uncomplicated to do and looks way fancier than the price tag would indicate at just 63 cents per square foot!
Even the little existing pantry closet got a lot of attention, and actually fits in now! I wish it was just a few inches shallower and didn’t overlap the original moldings, but in terms of working with what you’ve got…it’s a huge improvement! The bifolds got painted and new hardware, and I added another simple casing to match the window and original moldings with a simple 1×6 baseboard with a stock base cap to finish it off. I had to play dirty to get those moldings…Dad (Chris) said no because he was worried about time so, ya know, I had to go ask Mom (Julia) who gave me the go-ahead. I’m the worst! Scotty built out the top with a few pieces of framing lumber, 3/4″ plywood, and cove molding to bring the height up to the ceiling.
Funnily enough, I had no idea that the plan for the countertops was exactly what I did for my countertops in my now-demolished kitchen a few years ago! They look kind of like butcherblock but are really just 3/4″ pine project panels (small pieces of finger-jointed pine, essentially), with a 1×2 pine board face-nailed to the front to give the impression of a normal countertop thickness. These got stained with Minwax “Provincial” and three coats of water-based poly.
To be totally honest, since I feel I bear some responsibility here—the countertops aren’t something I’d recommend for a long-term remodel. Mine held up OK for the couple of years that they were in use, but not amazing, and real butcherblock is a more expensive but still very affordable (and classic!) choice. Given the budget these were a good answer, though, and they’ll be really easy to swap out down the line should the homeowners choose. Conveniently, Lowe’s happens to sell really beautiful and good quality (not to mention affordable!) butcherblock in a few different sizes (which of course can be easily cut to size), which is something I’m considering for my own remodeled kitchen! So, ya know, proceed with caution—there’s a reason for that difference in price and I’d recommend spending the little extra money for the real deal if you’re renovating for the long haul.
Oh! That brick!!! Isn’t it great? It was just hiding under the plaster. I’m not always a fan of exposed brick, actually, but it works so well here. The homeowners had already exposed it by the time we got there (THANK YOU, GUYS!!) and it’s just so perfectly-imperfect in a way that a new brick veneered wall or something wouldn’t be. It’s sealed to keep any dust and stuff contained.
So there it is, I guess! A kitchen in three days, with five bloggers and a handy blogger-brother too! And want to hear something that even shocked me, even though I was literally there the whole time? The budget came in at right around $4,500—and that includes all materials, cabinets, a new fridge, stove, range hood fan, dishwasher, sink, faucet, lighting…I MEAN, COME ON.
I love that the final product isn’t something any one of us would have done independently—it really does have a piece of everybody represented, and it’s so much better for it!
Now come to Kingston, you guys! Mine next! I GUESS we could even give ourselves a whole week or something crazy. Plus a spa day at the end. Definitely a spa day.
If you want to read more about this renovation, don’t miss Kim and Scott’s recap over at Yellow Brick Home and, of course, our fearless leaders’ take over at Chris Loves Julia! I’m off to go do that myself, ha! Chris, Julia, Brandon, Kim, and Scott (and Nate and Aura, of course!)—thank you thank you thank you for being the best teammates ever and bringing me in on the fun. I had a blast and can’t wait to do it again. Hint, hint, Lowe’s PR. :)
This post is in partnership with my long-time sponsors and pals over at Lowe’s! Thank you for your support, friends!
Lowe’s Spring Makeover: Dream Team in Baltimore Edition! published first on manhattan-nest.com
No comments:
Post a Comment