Floor speaker stands made from IKEA chopping board

I made a set of floor speaker stands from IKEA chopping boards.

The speakers are not going to move. These things weight about 30lbs. Much better than cheap floor speaker stands.

---

Related: DIY speaker stands with ADILS table legs

---

IKEA items used:

• Small FASCINERA x2
• Silver ADILS x2

Other items:

• 8×8 concrete blocks x4
• Concrete mix
• Walnut 12×12 wood pieces x2
• Caulking
• Pail
• Misc nuts and bolts
• Laminate board large enough to mount both concrete blocks
• Paint (look for misfit/mistake at hardware store… you might score like I did $2.50)
• Masking tape

Instructions for floor speaker stands

1. Drilled 2 holes in laminate board. This is to hold the ADILS legs in place.

2. Unscrew the leveling screw on the ADILS. Thread screw through holes on laminate board. Place board on spare blocks (don’t worry blocks are $1-$1.75 each). MAKE SURE EVERYTHING IS LEVEL.

3. Caulk the bottom of concrete blocks – to create seal of concrete mix.

4. Place ADILS in middle of concrete blocks

5. Let dry as per caulking instructions

6. Mask legs

7. Mix concrete as per concrete mix instructions

8. Pour concrete

9. Let dry as per concrete mix instructions

10. To hide the seams, I caulk the concrete blocks and new concrete

11. Painted blocks

12. Mounted the FASCINERA cutting boards using the hardware that comes with the ADILS

---

Related: IKEA NOT Floor Uplighter as Harmon Karmon speaker stand

---

13. Unscrew level screws and pry off concrete blocks. Should be easy off the laminate board.

Total cost:

• Less than $50

ADILS x 2 @ $4
FASCINERA x 2 @ 7.99
Concrete Mix @ $3
Concrete blocks x 4 @ $1.18
Misc about $10

Optional:

Leveling bolts.

Remember instruction #2? Well I didn’t have one of legs leveled. This can be fixed with speaker spikes. But budget minded like me might want to try this:

1. 12 x 12 wood (I went with walnut).
2. Drill holes on each corner and center.
3. Use nuts and bolts for leveling.
4. Place speaker on platform.

~ by Michael Singleton

The post Floor speaker stands made from IKEA chopping board appeared first on IKEA Hackers.

Floor speaker stands made from IKEA chopping board published first on www.ikeahackers.net